angle valve

Also, parasitic valves are also used in commercial and industrial piping systems, such as:

Water and sewage systems, gas supply systems, heating systems, air conditioning systems and heating systems, etc.

Angle valves are widely used by plumbers and craftsmen due to their ability to be installed in small spaces and their high strength and quality.

A valve parasite can effectively save you from dire disasters in the event of a bad leak or burst.

Also, if you want to repair or upgrade any appliance, there’s no need to shut off the water to your entire home’s plumbing or plumbing system.
Then angle the stop valve to stop the water flow in that line and repair it.

The best part about this valve is that it is suitable for any application that requires shut-off, flow control, temperature and pressure control.

You can also use parasitic valves at the industrial level.

However, for industrial operations, ensure that the valve is completely reliable for the safety of your application.

Angle valve functions

A valve parasite can effectively save you from dire disasters in the event of a bad leak or burst.

Also, if you want to repair or upgrade any appliance, there’s no need to shut off the water to your entire home’s plumbing or plumbing system. Then angle the stop valve to stop the water flow in that line and repair it.

The best part about this valve is that it is suitable for any application that requires shut-off, flow control, temperature and pressure control.

You can also use parasitic valves at the industrial level. However, for industrial operations, ensure that the valve is completely reliable for the safety of your application.
As you know, this valve allows you to direct or stop the flow of water whenever you want.

Also, it can affect the temperature. However, older versions may require multiple spins to turn off completely.

which is very dangerous in emergency situations. The latest version of the Engle valves require a quarter or half turn to do their job.

These parasitic valves are available in different shapes, sizes and types such as direct stop, multi-way and knob etc.

You just need to determine your scope of application and pipe size to get the right pipe.

In addition, you may need basic knowledge about its parts.

A simple discussion of the common parts of a valve parasite follows.

Angle valve components

Almost all types of parasitic valves have the same elements.

First of all, there is a rotary handle on the top that allows you to open the valve.

This handle is connected to a stem inside the valve.

In addition, the steam flows inside the valve and is connected to a disk at the bottom.

Also, there is an O-ring that provides a better seal.

Finally, the valve body has two ports:

The valve under the inlet
Side outlet valve

How to choose a suitable parasite

If you know where you’re going to use it, it’s not that difficult to choose an Engel Velo milk.

All you have to do is consider these selection criteria:
Design: The design of this faucet depends on the manufacturer and the place you use it.

Types and performance: The type and mode of operation can be different depending on the application.

The available options are:

Multi-turn angle ball, half-turn, quarter-turn, 2-way, 3-way, and others to choose according to your needs.

Material: Various metal materials are used to make different parts of this valve, for example, brass, zinc alloy, stainless steel, copper and plastic, etc. However, brass is the best material for the body and cartridge. And zinc alloy or stainless steel is the best choice for the valve meter.

Surface coating: Valve caps are available with chrome plating, nickel plating and polishing.

The chrome finish is suitable for almost any environment, but you can also have something to match the theme of your place.

Size: The most common size is 1/2″ X 3/8″. Determine and match it with your application pipe. If other sizes are required, ask your manufacturer.

Pressure Rating: Engel valves can withstand pressure up to 12 bar, which is good enough to withstand the pressure of the house water supply.

However, you may need to think a little more for industrial use.

Temperature range: Temperature endurance is between -10°C and 130°C. which is suitable for home use but may require more for some industrial applications.

Buy an angle valve

To buy an angle valve, you can follow the general steps below:

Specify the type of valve parasite:

Based on your specific application, identify the type of angle valve you need. Consider factors such as valve material, connection type (compression, solder, threaded, etc.) and any special features required.

Measurements:

Measure to ensure you choose a faucet that properly fits your plumbing system. Consider the size of the pipe and the space available for installation.

Check specifications:

Check the product specifications to make sure the valve meets your needs. This includes checking the maximum pressure rating, temperature compatibility and other relevant details.

The price of parasites

Comparison of brands and prices:

Compare different brands and prices to find the best price for your needs. Consider factors such as brand reputation, warranty, and customer reviews.