Yoshitake valve control model CT-1

Description

Yoshitake CT-1 valve control is a globe valve type pneumatic valve control. which is controlled by the controller output controller signals.

The body of this Yoshitaki valve control has a large capacity.

It can be used with single action actuator and electropneumatic positioners and smart positioners.

Features of Yoshitake valve control model CT-1

Yoshiake CT-1 valve control can be ordered in 1/2″ to 4″ sizes.

It can be used for steam, water, oil, air and liquids without risk.

The maximum working pressure of this Yoshiake valve control is 1.0 MPa.

The working temperature of this valve is from -5°C to 210°C and the air pressure of this Yoshitaki control valve is 0.35 to 0.4 MPA*2.

The body of this valve is made of cast iron and its plug and seat are made of stainless steel.

Important points in installing the Yoshiake CT-1 control valve

1- This control valve is not explosion-proof and should not be used in environments where there is a risk of explosive gas accumulation.

2- Avoid over-tightening the bolts and nuts with piping.

3- Install the control valve vertically.

Kiasanat is a supplier of all types of valve controls, Samson valve controls, Fisher valve controls, Samson three-way valve controls, Honeywell valve controls, Masonilan valve controls, Ari Armatorne valve controls, etc.

Related products